diff --git a/specification/stage-3/05_Idle_and_Inactive_Mode/05.02 System Information.md b/specification/stage-3/05_Idle_and_Inactive_Mode/05.02 System Information.md index 35b0f83a4f974115d90d06cc4161c7337ed77524..b30c9bb1e58c25beb7d560513a57d9eedac4857b 100644 --- a/specification/stage-3/05_Idle_and_Inactive_Mode/05.02 System Information.md +++ b/specification/stage-3/05_Idle_and_Inactive_Mode/05.02 System Information.md @@ -4,7 +4,7 @@ System Information (SI) is divided into the *MIB* and a number of SIBs and posSIBs where: -- the *MIB* is always transmitted on the BCH with a periodicity of 80 ms and repetitions made within 80 ms (TS 38.212 \[17\], clause 7.1) and it includes parameters that are needed to acquire *SIB1* from the cell. The first transmission of the *MIB* is scheduled in subframes as defined in TS 38.213 \[13\], clause 4.1 and repetitions are scheduled according to the period of SSB; +- the *MIB* is always transmitted on the BCH with a periodicity of 80 ms and repetitions made within 80 ms (TS 38.212 \[17\], clause 7.1) and it includes parameters that are needed to acquire *SIB1* from the cell. The first transmission of the *MIB* is scheduled in subframes as defined in TS 38.213 \[13\], clause 4.1 and repetitions are re-scheduled according to the period of SSB; **NOTE** 1: If the period of SSB is larger than 20 ms, the MIB is transmitted with the same periodicity as that of SSB. diff --git a/specification/stage-3/06_Connection_Control/06.01 Connection Setup.md b/specification/stage-3/06_Connection_Control/06.01 Connection Setup.md index e728cbd15026d6456ad35b133024b5a62299946c..3da034767b77da29f38902a956fb1248fdf99f98 100644 --- a/specification/stage-3/06_Connection_Control/06.01 Connection Setup.md +++ b/specification/stage-3/06_Connection_Control/06.01 Connection Setup.md @@ -24,7 +24,7 @@ The UE initiates the procedure when upper layers request establishment of an RRC The UE shall ensure having valid and up to date essential system information as specified in clause 5.2.2.2 before initiating this procedure. -Upon initiation of the procedure, the UE shall: +Upon initiation of the procedure, the UE shall also: - perform the unified access control procedure as specified in 5.3.14 using the Access Category and Access Identities provided by upper layers;