Refine table headings and formatting in 38533_excerpt.md for clarity and consistency

Table 4.3.2.2.1.5-1 defines the primary level settings for contention based random access test in FR1 for PSCell in EN-DC. Table 4.3.2.2.1.5-2, Table 4.3.2.2.1.5-3 and Table 4.3.2.2.1.5-4 define the Absolute power limits, Relative power limits and uplink timing error limits respectively, and all include test tolerances.

Table 4.3.2.2.1.5-1: General test parameters for contention based random access test\

in FR1 for PSCell in EN-DC

Table: Table 4.3.2.2.1.5-1: General test parameters for contention based random access test in FR1 for PSCell in EN-DC

| Parameter |  |  | Unit | Test 1 | Comments |

|--|------|-------------|:--------:|:-----------------:|:---------------:|

\- The transmit timing of the PRACH transmission shall be within the accuracy specified in Table 4.3.2.2.1.5-4.

Table 4.3.2.2.1.5-2: Absolute power tolerance Test requirements

Table: Table 4.3.2.2.1.5-2: Absolute power tolerance Test requirements

| Conditions | Tolerance |

|------------|:---------:|

`<br />`{=html}

Table 4.3.2.2.1.5-3: Relative power tolerance Test requirements

Table: Table 4.3.2.2.1.5-3: Relative power tolerance Test requirements

| **Power step ∆P (Up or down)**`<br />`{=html}**(dB)** | **PRACH (dB)** |

|-------------------------------------------------------|:--------------:|

`<br />`{=html}

Table 4.3.2.2.1.5-4: T~e~ Timing error Test requirements

Table: Table 4.3.2.2.1.5-4: T~e~ Timing error Test requirements

|  |  |  |  |

|--|:----------------:|:----------------:|:-------------------:|

This test can be run in the configurations defined in Table 4.3.2.2.2.4.1-1.

Table 4.3.2.2.2.4.1-1: Non-contention based random access test\

in FR1 for PSCell in EN-DC supported test configurations

Table: Table 4.3.2.2.2.4.1-1: Non-contention based random access test in FR1 for PSCell in EN-DC supported test configurations

| Test Case ID | Test Config Index | Description |

|--|------------|------------------------------------------------|

Configure the test equipment and the DUT according to the parameters in Table 4.3.2.2.2.4.1-2.

Table 4.3.2.2.2.4.1-2: Initial conditions for Non-contention based random access test in FR1 for EN-DC

Table: Table 4.3.2.2.2.4.1-2: Initial conditions for Non-contention based random access test in FR1 for EN-DC

| Parameter | Value |  | Comment |

|--|---------|---------------------|-----------------------------|

Message contents are according to TS 38.508-1 \[14\] clause 4.6.1 with the following exceptions.

Table 4.3.2.2.2.4.3-0: Common Exception messages

Table: Table 4.3.2.2.2.4.3-0: Common Exception messages

| Default Message Contents |  |

|--|-------------------------------------------|

`<br />`{=html}

Table 4.3.2.2.2.4.3-1: RACH-ConfigCommon for Non-contention Based Random Access

Table: Table 4.3.2.2.2.4.3-1: RACH-ConfigCommon for Non-contention Based Random Access

| Derivation Path: TS 38.508-1 \[14\], Table 4.6.3-128 |  |  |  |

|--|-----------------|-------------|----------|

`<br />`{=html}

Table 4.3.2.2.2.4.3-2: RACH-ConfigDedicated for Non-contention Based Random Access

Table: Table 4.3.2.2.2.4.3-2: RACH-ConfigDedicated for Non-contention Based Random Access

| Derivation Path: TS 38.508-1 \[14\], Table 4.6.3-129 |  |  |  |

|--|-----------------|-------------|----------|

`<br />`{=html}

Table 4.3.2.2.2.4.3-3: RACH-ConfigGeneric for Non-contention Based Random Access

Table: Table 4.3.2.2.2.4.3-3: RACH-ConfigGeneric for Non-contention Based Random Access

| Derivation Path: TS 38.508-1 \[14\], Table 4.6.3-130 |  |  |  |

|--|-----------------|-------------|----------|

`<br />`{=html}

Table 4.3.2.2.2.4.3-4: *ServingCellConfigCommon* for Non-contention Based Random Access

Table: Table 4.3.2.2.2.4.3-4: *ServingCellConfigCommon* for Non-contention Based Random Access

| Derivation Path: TS 38.508-1 \[14\], Table 4.6.3-168 |  |  |  |

|--|-----------------|-------------|----------|

`<br />`{=html}

Table 4.3.2.2.2.4.3-5: CellGroupConfig for Non-contention Based Random Access

Table: Table 4.3.2.2.2.4.3-5: CellGroupConfig for Non-contention Based Random Access

|  |  |  |  |

|--|:----------------|:-----------|:----------|

Table 4.3.2.2.2.5-1 defines the primary level settings for non-contention based random access test in FR1 for PSCell in EN-DC. Table 4.3.2.2.2.5-2, Table 4.3.2.2.2.5-3 and Table 4.3.2.2.2.5-4 define the Absolute power limits, Relative power limits and uplink timing error limits respectively, and all include test tolerances.

Table 4.3.2.2.2.5-1: General test parameters for non-contention\

Table: Table 4.3.2.2.2.5-1: General test parameters for non-contention\

based random access test in FR1 for PSCell in EN-DC

| Parameter |  |  | Unit | Test 1 | **Test 2** | **Comments** |

\- The transmit timing of all PRACH transmissions shall be within the accuracy specified in Table 4.3.2.2.2.5-4.

Table 4.3.2.2.2.5-2: Absolute power tolerance Test requirements

Table: Table 4.3.2.2.2.5-2: Absolute power tolerance Test requirements

| **Conditions** | **Tolerance** |

|----------------|:-------------:|

`<br />`{=html}

Table 4.3.2.2.2.5-3: Relative power tolerance Test requirements

Table: Table 4.3.2.2.2.5-3: Relative power tolerance Test requirements

| **Power step ∆P (Up or down) (dB)** | **PRACH (dB)** |

|-------------------------------------|:--------------:|

`<br />`{=html}

Table 4.3.2.2.2.5-4: T~e~ Timing error Test requirements

Table: Table 4.3.2.2.2.5-4: T~e~ Timing error Test requirements

|  |  |  |  |

|--|:----------------:|:----------------:|:-------------------:|