* - Common contents of system information blocks exceptions
-
@@ -1508,89 +1510,236 @@ Message contents are according to TS 38.508-1 \[14\] clause 7.3 with the followi
Table 4.3.2.2.1.5-1 defines the primary level settings for contention based random access test in FR1 for PSCell in EN-DC. Table 4.3.2.2.1.5-2, Table 4.3.2.2.1.5-3 and Table 4.3.2.2.1.5-4 define the Absolute power limits, Relative power limits and uplink timing error limits respectively, and all include test tolerances.
Table: Table 4.3.2.2.1.5-1: General test parameters for contention based random access test in FR1 for PSCell in EN-DC
| EPRE ratio of PDCCH to PDCCH_DMRS | | | dB | | |
| EPRE ratio of PDSCH_DMRS to SSS | | | dB | | |
| EPRE ratio of PDSCH to PDSCH_DMRS | | | dB | | |
| SSB with index 0 | $\frac{\hat{E}_s}{I_{ot}}$ | | dB | 3 | Power of SSB with index 0 is set to be above configured *rsrp-ThresholdSSB* |
| | $N_{oc}$ | Config 1,2 | dBm/15kHz | -98 | |
| | | Config 3,4 | | -101 | |
| | $\frac{\hat{E}_s}{N_{oc}}$ | | dB | 3 | |
| | SS-RSRP | Config 1,2 | dBm/15kHz | -95 | |
| | | Config 3,4 | | -98 | |
| | SS-RSRP | | dBm/SCS | -95 | |
| SSB with index 1 | $\frac{\hat{E}_s}{I_{ot}}$ | | dB | -17 | Power of SSB with index 1 is set to be below configured *rsrp-ThresholdSSB* |
| | $N_{oc}$ | Config 1,2 | dBm/15kHz | -98 | |
| | | Config 3,4 | | -101 | |
| | $\frac{\hat{E}_s}{N_{oc}}$ | | dB | -17 | |
| | SS-RSRP | Config 1,2 | dBm/15kHz | -115 | |
| | | Config 3,4 | | -118 | |
| | SS-RSRP | | dBm/SCS | -115 | |
| Io ^Note\ 2^ | | Config 1,2 | dBm | -65.3/9.36MHz | For symbols without SSB index 1 |
| | | Config 3,4 | | -62.2/38.16MHz | |
| ss-PBCH-BlockPower | | | dBm/SCS | -5 | As defined in clause 6.3.2 in TS 38.331 \[13\]. |
| Configured UE transmitted power ($P_{CMAX,f,c}$) | | | dBm | 23 | As defined in clause 6.2.4 in TS 38.101-1 \[2\]. |
| PRACH Configuration | | | | PRACH.1 FR1 | As defined in clause A.7.1. |
| Propagation Condition | | | \- | AWGN | |
| NOTE 1: OCNG shall be used such that the cell is fully allocated, and a constant total transmitted power spectral density is achieved for all OFDM symbols. The OCNG pattern is chosen during the test according to the presence of a DL reference measurement channel.`<br />`{=html}NOTE 2: Es/Iot, SS-RSRP and Io level have been derived from other parameters for information purpose. They are not settable parameters.`<br />`{=html}NOTE 3: Void.`<br />`{=html}NOTE 4: The DL PDSCH reference measurement channel is used in the test only when a downlink transmission dedicated to the UE under test is required. | | | | | |
Test 1: Correct behaviour when transmitting Random Access Preamble:
* - []{colspan=3} EPRE ratio of PDCCH to PDCCH_DMRS
- dB
\- The Random Access Preamble shall be one of the Random Access Preambles associated with SSB index 0.
* - []{colspan=3} EPRE ratio of PDSCH_DMRS to SSS
- dB
Test 2: Correct behaviour when receiving Random Access Response:
* - []{colspan=3} EPRE ratio of PDSCH to PDSCH_DMRS
- dB
\- The power of the first preamble shall be -22 dBm within the accuracy specified in Table 4.3.2.2.1.5-2.
* - []{rowspan=7} SSB with index 0
- []{colspan=2} $\frac{\hat{E}_s}{I_{ot}}$
- dB
- 3
- []{rowspan=7} Power of SSB with index 0 is set to be above configured *rsrp-ThresholdSSB*
* - []{rowspan=2} $N_{oc}$
- Config 1,2
- []{rowspan=2} dBm/15kHz
- -98
* - Config 3,4
- -101
* - []{colspan=2} $\frac{\hat{E}_s}{N_{oc}}$
- dB
- 3
* - []{rowspan=2} SS-RSRP
- Config 1,2
- []{rowspan=2} dBm/15kHz
- -95
* - Config 3,4
- -98
\- The relative power for preamble ramping step shall be 2 dB within the accuracy specified in Table 4.3.2.2.1.5-3.
* - []{colspan=2} SS-RSRP
- dBm/SCS
- -95
\- The transmit timing of all PRACH transmissions shall be within the accuracy specified in Table 4.3.2.2.1.5-4.
* - []{rowspan=7} SSB with index 1
- []{colspan=2} $\frac{\hat{E}_s}{I_{ot}}$
- dB
- -17
- []{rowspan=7} Power of SSB with index 1 is set to be below configured *rsrp-ThresholdSSB*
Test 3: Correct behaviour when not receiving Random Access Response:
* - []{rowspan=2} $N_{oc}$
- Config 1,2
- []{rowspan=2} dBm/15kHz
- -98
\- The power of the first preamble shall be -22 dBm within the accuracy specified in Table 4.3.2.2.1.5-2.
* - Config 3,4
- -101
\- The relative power for preamble ramping step shall be 2 dB within the accuracy specified in Table 4.3.2.2.1.5-3.
* - []{colspan=2} $\frac{\hat{E}_s}{N_{oc}}$
- dB
- -17
\- The transmit timing of all PRACH transmissions shall be within the accuracy specified in Table 4.3.2.2.1.5-4.
* - []{rowspan=2} SS-RSRP
- Config 1,2
- []{rowspan=2} dBm/15kHz
- -115
Test 4: Correct behaviour when receiving an UL grant for msg3 retransmission:
* - Config 3,4
- -118
\- The UE shall re-transmit the msg3 upon the reception of an UL grant for msg3 retransmission.
* - []{colspan=2} SS-RSRP
- dBm/SCS
- -115
Test 5: Correct behaviour when receiving a successful UE Contention Resolution:
* - []{colspan=2 rowspan=2} Io ^Note\ 2^
- Config 1,2
- []{rowspan=2} dBm
- -65.3/9.36MHz
- []{rowspan=2} For symbols without SSB index 1
\- The UE shall send PUSCH according to the PDCCH addressed to the C-RNTI.
* - Config 3,4
- -62.2/38.16MHz
Test 7: Correct behaviour when contention resolution timer expires:
* - []{colspan=3} ss-PBCH-BlockPower
- dBm/SCS
- -5
- As defined in clause 6.3.2 in TS 38.331 [13].
\- The UE shall re-select a preamble and transmit with the calculated PRACH transmission power when the back off time expires if the contention resolution timer expires.
* - []{colspan=3} Configured UE transmitted power ($P_{CMAX,f,c}$)
- dBm
- 23
- As defined in clause 6.2.4 in TS 38.101-1 [2].
\- The power of the first preamble shall be -22 dBm within the accuracy specified in Table 4.3.2.2.1.5-2.
* - []{colspan=3} Configured PRACH Configuration
-
- PRACH.1 FR1
- As defined in clause A.7.1.
* - []{colspan=3} Propagation Condition
-\-
- AWGN
-
* - []{colspan=6} NOTE 1: OCNG shall be used such that the cell is fully allocated, and a constant total transmitted power spectral density is achieved for all OFDM symbols. The OCNG pattern is chosen during the test according to the presence of a DL reference measurement channel.`<br />`{=html}
NOTE 2: Es/Iot, SS-RSRP and Io level have been derived from other parameters for information purpose. They are not settable parameters. `<br />`{=html}
NOTE 3: Void. `<br />`{=html}
NOTE 4: The DL PDSCH reference measurement channel is used in the test only when a downlink transmission dedicated to the UE under test is required. `<br />`{=html}
:::
`<br />`{=html}
\- The transmit timing of the PRACH transmission shall be within the accuracy specified in Table 4.3.2.2.1.5-4.
>Test 1: Correct behaviour when transmitting Random Access Preamble:
>
>>\- The Random Access Preamble shall be one of the Random Access Preambles associated with SSB index 0.
>
>Test 2: Correct behaviour when receiving Random Access Response:
>
>>\- The power of the first preamble shall be -22 dBm within the accuracy specified in Table 4.3.2.2.1.5-2.
>
>>\- The relative power for preamble ramping step shall be 2 dB within the accuracy specified in Table 4.3.2.2.1.5-3.
>
>>\- The transmit timing of all PRACH transmissions shall be within the accuracy specified in Table 4.3.2.2.1.5-4.
>
>Test 3: Correct behaviour when not receiving Random Access Response:
>
>>\- The power of the first preamble shall be -22 dBm within the accuracy specified in Table 4.3.2.2.1.5-2.
>
>>\- The relative power for preamble ramping step shall be 2 dB within the accuracy specified in Table 4.3.2.2.1.5-3.
>
>>\- The transmit timing of all PRACH transmissions shall be within the accuracy specified in Table 4.3.2.2.1.5-4.
>
>Test 4: Correct behaviour when receiving an UL grant for msg3 retransmission:
>
>>\- The UE shall re-transmit the msg3 upon the reception of an UL grant for msg3 retransmission.
>
>Test 5: Correct behaviour when receiving a successful UE Contention Resolution:
>
>>\- The UE shall send PUSCH according to the PDCCH addressed to the C-RNTI.
>
>Test 7: Correct behaviour when contention resolution timer expires:
>
>>\- The UE shall re-select a preamble and transmit with the calculated PRACH transmission power when the back off time expires if the contention resolution timer expires.
>
>>\- The power of the first preamble shall be -22 dBm within the accuracy specified in Table 4.3.2.2.1.5-2.
>
>>\- The transmit timing of the PRACH transmission shall be within the accuracy specified in Table 4.3.2.2.1.5-4.
Table: **Table 4.3.2.2.1.5-2: Absolute power tolerance Test requirements**
@@ -1614,7 +1763,7 @@ Table: **Table 4.3.2.2.1.5-3: Relative power tolerance Test requirements**
* - Common contents of system information blocks exceptions
-
@@ -1586,89 +1588,235 @@ Message contents are according to TS 38.508-1 \[14\] clause 7.3 with the followi
Table 4.3.2.2.1.5-1 defines the primary level settings for contention based random access test in FR1 for PSCell in EN-DC. Table 4.3.2.2.1.5-2, Table 4.3.2.2.1.5-3 and Table 4.3.2.2.1.5-4 define the Absolute power limits, Relative power limits and uplink timing error limits respectively, and all include test tolerances.
Table: Table 4.3.2.2.1.5-1: General test parameters for contention based random access test in FR1 for PSCell in EN-DC
| EPRE ratio of PDCCH to PDCCH_DMRS | | | dB | | |
| EPRE ratio of PDSCH_DMRS to SSS | | | dB | | |
| EPRE ratio of PDSCH to PDSCH_DMRS | | | dB | | |
| SSB with index 0 | $\frac{\hat{E}_s}{I_{ot}}$ | | dB | 3 | Power of SSB with index 0 is set to be above configured *rsrp-ThresholdSSB* |
| | $N_{oc}$ | Config 1,2 | dBm/15kHz | -98 | |
| | | Config 3,4 | | -101 | |
| | $\frac{\hat{E}_s}{N_{oc}}$ | | dB | 3 | |
| | SS-RSRP | Config 1,2 | dBm/15kHz | -95 | |
| | | Config 3,4 | | -98 | |
| | SS-RSRP | | dBm/SCS | -95 | |
| SSB with index 1 | $\frac{\hat{E}_s}{I_{ot}}$ | | dB | -17 | Power of SSB with index 1 is set to be below configured *rsrp-ThresholdSSB* |
| | $N_{oc}$ | Config 1,2 | dBm/15kHz | -98 | |
| | | Config 3,4 | | -101 | |
| | $\frac{\hat{E}_s}{N_{oc}}$ | | dB | -17 | |
| | SS-RSRP | Config 1,2 | dBm/15kHz | -115 | |
| | | Config 3,4 | | -118 | |
| | SS-RSRP | | dBm/SCS | -115 | |
| Io ^Note\ 2^ | | Config 1,2 | dBm | -65.3/9.36MHz | For symbols without SSB index 1 |
| | | Config 3,4 | | -62.2/38.16MHz | |
| ss-PBCH-BlockPower | | | dBm/SCS | -5 | As defined in clause 6.3.2 in TS 38.331 \[13\]. |
| Configured UE transmitted power ($P_{CMAX,f,c}$) | | | dBm | 23 | As defined in clause 6.2.4 in TS 38.101-1 \[2\]. |
| PRACH Configuration | | | | PRACH.1 FR1 | As defined in clause A.7.1. |
| Propagation Condition | | | \- | AWGN | |
| NOTE 1: OCNG shall be used such that the cell is fully allocated, and a constant total transmitted power spectral density is achieved for all OFDM symbols. The OCNG pattern is chosen during the test according to the presence of a DL reference measurement channel.`<br />`{=html}NOTE 2: Es/Iot, SS-RSRP and Io level have been derived from other parameters for information purpose. They are not settable parameters.`<br />`{=html}NOTE 3: Void.`<br />`{=html}NOTE 4: The DL PDSCH reference measurement channel is used in the test only when a downlink transmission dedicated to the UE under test is required. | | | | | |
\- The relative power for preamble ramping step shall be 2 dB within the accuracy specified in Table 4.3.2.2.1.5-3.
* - Config 3,4
-
- CCR.2.1 TDD
-
* - []{colspan=3} NR RF Channel Number
-
- 1
* - []{colspan=3} EPRE ratio of PSS to SSS
- dB
- []{rowspan=7} 0
* - []{colspan=3} EPRE ratio of PBCH_DMRS to SSS
- dB
* - []{colspan=3} EPRE ratio of PBCH to PBCH_DMRS
- dB
* - []{colspan=3} EPRE ratio of PDCCH_DMRS to SSS
- dB
* - []{colspan=3} EPRE ratio of PDCCH to PDCCH_DMRS
- dB
* - []{colspan=3} EPRE ratio of PDSCH_DMRS to SSS
- dB
* - []{colspan=3} EPRE ratio of PDSCH to PDSCH_DMRS
- dB
* - []{rowspan=7} SSB with index 0
- []{colspan=2} $\frac{\hat{E}_s}{I_{ot}}$
- dB
- 3
- []{rowspan=7} Power of SSB with index 0 is set to be above configured *rsrp-ThresholdSSB*
* - []{rowspan=2} $N_{oc}$
- Config 1,2
- []{rowspan=2} dBm/15kHz
- -98
* - Config 3,4
- -101
* - []{colspan=2} $\frac{\hat{E}_s}{N_{oc}}$
- dB
- 3
\- The transmit timing of all PRACH transmissions shall be within the accuracy specified in Table 4.3.2.2.1.5-4.
Test 4: Correct behaviour when receiving an UL grant for msg3 retransmission:
* - []{rowspan=2} SS-RSRP
- Config 1,2
- []{rowspan=2} dBm/15kHz
- -95
\- The UE shall re-transmit the msg3 upon the reception of an UL grant for msg3 retransmission.
* - Config 3,4
- -98
Test 5: Correct behaviour when receiving a successful UE Contention Resolution:
* - []{colspan=2} SS-RSRP
- dBm/SCS
- -95
\- The UE shall send PUSCH according to the PDCCH addressed to the C-RNTI.
* - []{rowspan=7} SSB with index 1
- []{colspan=2} $\frac{\hat{E}_s}{I_{ot}}$
- dB
- -17
- []{rowspan=7} Power of SSB with index 1 is set to be below configured *rsrp-ThresholdSSB*
Test 7: Correct behaviour when contention resolution timer expires:
* - []{rowspan=2} $N_{oc}$
- Config 1,2
- []{rowspan=2} dBm/15kHz
- -98
\- The UE shall re-select a preamble and transmit with the calculated PRACH transmission power when the back off time expires if the contention resolution timer expires.
* - Config 3,4
- -101
\- The power of the first preamble shall be -22 dBm within the accuracy specified in Table 4.3.2.2.1.5-2.
* - []{colspan=2} $\frac{\hat{E}_s}{N_{oc}}$
- dB
- -17
\- The transmit timing of the PRACH transmission shall be within the accuracy specified in Table 4.3.2.2.1.5-4.
* - []{rowspan=2} SS-RSRP
- Config 1,2
- []{rowspan=2} dBm/15kHz
- -115
* - Config 3,4
- -118
* - []{colspan=2} SS-RSRP
- dBm/SCS
- -115
* - []{colspan=2 rowspan=2} Io ^Note\ 2^
- Config 1,2
- []{rowspan=2} dBm
- -65.3/9.36MHz
- []{rowspan=2} For symbols without SSB index 1
* - Config 3,4
- -62.2/38.16MHz
* - []{colspan=3} ss-PBCH-BlockPower
- dBm/SCS
- -5
- As defined in clause 6.3.2 in TS 38.331 [13].
* - []{colspan=3} Configured UE transmitted power ($P_{CMAX,f,c}$)
- dBm
- 23
- As defined in clause 6.2.4 in TS 38.101-1 [2].
* - []{colspan=3} Configured PRACH Configuration
-
- PRACH.1 FR1
- As defined in clause A.7.1.
* - []{colspan=3} Propagation Condition
- \-
- AWGN
-
* - []{colspan=6} NOTE 1: OCNG shall be used such that the cell is fully allocated, and a constant total transmitted power spectral density is achieved for all OFDM symbols. The OCNG pattern is chosen during the test according to the presence of a DL reference measurement channel.`<br />`{=html}
NOTE 2: Es/Iot, SS-RSRP and Io level have been derived from other parameters for information purpose. They are not settable parameters. `<br />`{=html}
NOTE 3: Void. `<br />`{=html}
NOTE 4: The DL PDSCH reference measurement channel is used in the test only when a downlink transmission dedicated to the UE under test is required. `<br />`{=html}
:::
`<br />`{=html}
>Test 1: Correct behaviour when transmitting Random Access Preamble:
>
>>\- The Random Access Preamble shall be one of the Random Access Preambles associated with SSB index 0.
>
>Test 2: Correct behaviour when receiving Random Access Response:
>
>>\- The power of the first preamble shall be -22 dBm within the accuracy specified in Table 4.3.2.2.1.5-2.
>
>>\- The relative power for preamble ramping step shall be 2 dB within the accuracy specified in Table 4.3.2.2.1.5-3.
>
>>\- The transmit timing of all PRACH transmissions shall be within the accuracy specified in Table 4.3.2.2.1.5-4.
>
>Test 3: Correct behaviour when not receiving Random Access Response:
>
>>\- The power of the first preamble shall be -22 dBm within the accuracy specified in Table 4.3.2.2.1.5-2.
>
>>\- The relative power for preamble ramping step shall be 2 dB within the accuracy specified in Table 4.3.2.2.1.5-3.
>
>>\- The transmit timing of all PRACH transmissions shall be within the accuracy specified in Table 4.3.2.2.1.5-4.
>
>Test 4: Correct behaviour when receiving an UL grant for msg3 retransmission:
>
>>\- The UE shall re-transmit the msg3 upon the reception of an UL grant for msg3 retransmission.
>
>Test 5: Correct behaviour when receiving a successful UE Contention Resolution:
>
>>\- The UE shall send PUSCH according to the PDCCH addressed to the C-RNTI.
>
>Test 7: Correct behaviour when contention resolution timer expires:
>
>>\- The UE shall re-select a preamble and transmit with the calculated PRACH transmission power when the back off time expires if the contention resolution timer expires.
>
>>\- The power of the first preamble shall be -22 dBm within the accuracy specified in Table 4.3.2.2.1.5-2.
>
>>\- The transmit timing of the PRACH transmission shall be within the accuracy specified in Table 4.3.2.2.1.5-4.
Table: **Table 4.3.2.2.1.5-2: Absolute power tolerance Test requirements**
@@ -1692,7 +1840,7 @@ Table: **Table 4.3.2.2.1.5-3: Relative power tolerance Test requirements**
