Commit e2cab786 authored by Oskar Myrberg (Ericsson)'s avatar Oskar Myrberg (Ericsson)
Browse files

Update 2 files 

- /specification/stage-3/06_Connection_Control/06.01 Connection Setup.md
- /specification/stage-3/05_Idle_and_Inactive_Mode/05.02 System Information.md
parent 36788062

specification/stage-3/05_Idle_and_Inactive_Mode/05.02 System Information.md

+1 −1
Original line number Diff line number Diff line
@@ -14,7 +14,7 @@ System Information (SI) is divided into the *MIB* and a number of SIBs and posSI 


- The mapping of SIBs to SI messages is configured in *schedulingInfoList* and *schedulingInfoList2*, while the mapping of posSIBs to SI messages is configured in *posSchedulingInfoList* and *schedulingInfoList2. *Each SIB and each posSIB is mapped to a single SI message. posSIBs of the same *posSibType* carrying GNSS Generic Assistance Data for different GNSS/SBAS (identified by *gnss-id/sbas-id*, see TS 37.355 \[49\]) are mapped to different SI messages. Each SIB and posSIB is contained at most once in an SI message. For SIBs and posSIBs with segments, the segments contained in SI messages are transmitted according to the SI message periodicity, with one segment of a particular *sibType*/*posSibType* in each SI message;



- For a UE in RRC_CONNECTED, the network can provide system information through dedicated signalling using the *RRCReconfiguration* message, e.g. if the UE has an active BWP with no common search space configured to monitor system information, paging, or upon request from the UE.

- For a UE in RRC_CONNECTED, the network can provide system information through dedicated signalling using the *RRCReconfiguration* message, paging, or upon request from the UE.



- For PSCell and SCells, the network provides the required SI by dedicated signalling, i.e. within an *RRCReconfiguration* message. Nevertheless, the UE shall acquire *MIB* of the PSCell to get SFN timing of the SCG (which may be different from MCG). Upon change of relevant SI for SCell, the network releases and adds the concerned SCell. For PSCell, the required SI can only be changed with Reconfiguration with Sync.

specification/stage-3/06_Connection_Control/06.01 Connection Setup.md

+1 −1
Original line number Diff line number Diff line
@@ -32,6 +32,6 @@ Upon initiation of the procedure, the UE shall: 


- apply the Uu configuration according to [SIB1](../05%20Idle%20and%20Inactive%20Mode/asn1/Uu-6G-SystemInformation.asn) or, for parameters not configured therein, the default configuration according to the respective clauses of the specification,



- start timer T300,

- start or restart timer T300,



- prepare and transmit the [ConnectionSetupRequest](./asn1/Uu-6G-ConnectionControl.asn) message in accordance with the its ASN.1 definition.