Unverified Commit 347e1c97 authored by Henning Wiemann's avatar Henning Wiemann
Browse files

Moving notes in DC schema file from DL- to UL-section since the JSON data... 

Moving notes in DC schema file from DL- to UL-section since the JSON data files use them only/mostly for those.
parent 369f6bd6

jsonSchemas/BandCombinationsDualConnectivity.json

+38 −34
Original line number Diff line number Diff line
@@ -49,6 +49,10 @@ 
                "description": "For UE(s) supporting dynamic power sharing it is mandatory to do dual simultaneous UL. For UE(s) not supporting dynamic power sharing single UL is allowed. Uplink DC_(n)71AA is not applicable to BCS2.",

                "type": "boolean"

              },

              "pc2": {

                "description": "Minimum requirements for PC2 are applicable for this uplink EN-DC configuration in this downlink/uplink EN-DC configuration.",

                "type": "boolean"

              },

              "pc2_1tx+1tx": {

                "description": "Minimum requirements for PC2 are applicable for this uplink EN-DC configuration in this downlink/uplink EN-DC configuration with 1Tx antenna connector in each band.",

                "type": "boolean"
@@ -62,8 +66,37 @@ 
                "type": "boolean"

              },

              "pc1.5_Table6.2B.1.1-1": {

                "description": "The PC2 Uplink EN-DC configuration supported in Table 6.2B.1.1-1 is applicable to the same EN-DC configuration.",

                "description": "The PC1.5 Uplink EN-DC configuration supported in Table 6.2B.1.1-1 is applicable to the same EN-DC configuration.",

                "type": "boolean"

              },

              "B1orB28Only": {

                "description": "UL carrier shall be supported in Band 1 or band 28 only. Power imbalance between downlink carriers on Band 7 and Band 38 is assumed to be within 6dB.",

                "type": "boolean"

              },

              "B2orB66Only": {

                "description": "UL carrier shall be supported in Band 2 or band 66 only. Power imbalance between downlink carriers on Band 7 and Band 38 is assumed to be within 6dB.",

                "type": "boolean"

              },

              "B3orB28Only": {

                "description": "UL carrier shall be supported in Band 3 or band 28 only. Power imbalance between downlink carriers on Band 7 and Band 38 is assumed to be within 6dB.",

                "type": "boolean"

              },

              "DC_2_n2_RESSENS": {

                "description": "The downlink DC_2_n2 RESSENS requirements only apply when the band n2 downlink carrier is configured closer to the uplink operating band than the E-UTRA Band 2 downlink carrier.",

                "type": "boolean"

              },

              "fwa4Ant": {

                "description": "The implementation with 4 antennas is targeted for FWA form factor for this band combination.",

                "type": "boolean"

              },

              "n71AA_Uplink_BCS2": {

                "description": "Uplink DC_(n)71AA is not applicable to BCS2."

              },

              "presentRelease": {

                "description": "Uplink EN-DC configurations are the configurations supported by the present release of specifications. WARNING: This should not be used in any BC."

              },

              "undefined": {

                "description": "WARNING: This footnote is used in some BCs but undefined in the specification."

              }

            }

          }
@@ -107,6 +140,10 @@ 
          "description": "The minimum requirements apply only when there is non-simultaneous Rx/Tx operation between E-UTRA and NR carriers. This restriction applies also for these carriers when applicable EN-DC configuration is part of a higher order EN-DC configuration.",

          "type": "boolean"

        },

        "nonSimRxTx": {

          "description": "The minimum requirements apply only when there is non-simultaneous Rx/Tx operation between E-UTRA and NR carriers. This restriction applies also for these carriers when applicable EN-DC configuration is part of a higher order EN-DC configuration.",

          "type": "boolean"

        },

        "B42B48_n77n78": {

          "description": "If a UE does not indicate interBandMRDC-WithOverlapDL-Bands-r16 or a UE indicates both interBandMRDC-WithOverlapDL-Bands-r16 and requirementTypeIndication-r18 and IE nonCollocatedTypeMRDC is provided, the minimum requirements for intra-band non-contiguous EN-DC apply for the Band 42/48 and Band n77/n78 combination. If a UE does not indicate interBandMRDC-WithOverlapDL-Bands-r16 or a UE indicates both interBandMRDC-WithOverlapDL-Bands-r16 and requirementTypeIndication-r18 and IE nonCollocatedTypeMRDC is provided and UE indicates interBandContiguousMRDC, the minimum requirements for intra-band contiguous EN-DC also apply in addtion to intra-band non-contiguous EN-DC. The intra-band requirements also apply for these carriers when applicable EN-DC configuration is a subset of a higher order EN-DC configuration.",

          "type": "boolean"
@@ -147,10 +184,6 @@ 
          "description": "Simultaneous Rx/Tx capability does not apply for UEs supporting band 42 with a n77 implementation only. Same restrictions are applied to related higher order configurations.",

          "type": "boolean"

        },

        "fwa4Ant": {

          "description": "The implementation with 4 antennas is targeted for FWA form factor for this band combination.",

          "type": "boolean"

        },

        "noFallbackWithoutB2": {

          "description": "The combination is not used alone as fallback mode of other band combinations in which UL in Band 2 is not used.",

          "type": "boolean"
@@ -183,10 +216,6 @@ 
          "description": "The frequency range in band 42 is restricted for this band combination to 3440 - 3520 MHz.",

          "type": "boolean"

        },

        "pc2": {

          "description": "Minimum requirements for PC2 are applicable for this uplink EN-DC configuration in this downlink/uplink EN-DC configuration.",

          "type": "boolean"

        },

        "noInterBandMRDC": {

          "description": "For UEs not indicating interBandMRDC-WithOverlapDL-Bands-r16, the minimum requirements for intra-band non-contiguous EN-DC apply for the Band 42/48 and Band n77/n78 combination and for the Band 2 and Band n25 combinations. For UEs not indicating interBandMRDC-WithOverlapDL-Bands-r16, when UE capability interBandContiguousMRDC is indicated, the minimum requirements for intra-band-contiguous EN-DC also should be met in addtion to intra-band non-contiguous EN-DC.",

          "type": "boolean"
@@ -203,10 +232,6 @@ 
          "description": "For UEs not indicating interBandMRDC-WithOverlapDL-Bands-r16, the minimum requirements apply for synchronized DL carriers with a maximum receive time difference ≤ 3 usec between overlapping or partially overlapping DL bands contained in different cell groups.",

          "type": "boolean"

        },

        "DC_2_n2_RESSENS": {

          "description": "The downlink DC_2_n2 RESSENS requirements only apply when the band n2 downlink carrier is configured closer to the uplink operating band than the E-UTRA Band 2 downlink carrier.",

          "type": "boolean"

        },

        "nonSimuRxTx_n77n79": {

          "description": "The minimum requirements apply only when there is non-simultaneous Rx/Tx operation between n77-n79 NR carriers. This restriction applies also for these carriers when applicable EN-DC configuration is part of a higher order configuration.",

          "type": "boolean"
@@ -219,10 +244,6 @@ 
          "description": "Only applicable for UE supporting inter-band carrier aggregation without simultaneous Rx/Tx.",

          "type": "boolean"

        },

        "B2orB66Only": {

          "description": "UL carrier shall be supported in Band 2 or band 66 only. Power imbalance between downlink carriers on Band 7 and Band 38 is assumed to be within 6dB.",

          "type": "boolean"

        },

        "noFallbackWithoutB42": {

          "description": "The combination is not used alone as fall back mode of other band combinations in which UL in Band 42 is not used.",

          "type": "boolean"
@@ -243,14 +264,6 @@ 
          "description": "Band 7 and Band n38 are restricted as DL Scell. Power imbalance between downlink carriers on Band 7 and Band 38  is assumed to be within 6dB.",

          "type": "boolean"

        },

        "B1orB28Only": {

          "description": "UL carrier shall be supported in Band 1 or band 28 only. Power imbalance between downlink carriers on Band 7 and Band 38 is assumed to be within 6dB.",

          "type": "boolean"

        },

        "B3orB28Only": {

          "description": "UL carrier shall be supported in Band 3 or band 28 only. Power imbalance between downlink carriers on Band 7 and Band 38 is assumed to be within 6dB.",

          "type": "boolean"

        },

        "noInterBandMRDC_B42_n77n78": {

          "description": "For UEs not indicating interBandMRDC-WithOverlapDL-Bands-r16, the minimum requirements for intra-band non-contiguous EN-DC apply for the Band 42 and Band n77/n78 combination. For UEs not indicating interBandMRDC-WithOverlapDL-Bands-r16, when UE capability interBandContiguousMRDC is indicated, the minimum requirements for intra-band-contiguous EN-DC also should be met in addtion to intra-band non-contiguous EN-DC.",

          "type": "boolean"
@@ -258,15 +271,6 @@ 
        "NA": {

          "description": "Not Available (defined an used in Table 5.5B.4.2-1)"

        },

        "n71AA_Uplink_BCS2": {

          "description": "Uplink DC_(n)71AA is not applicable to BCS2."

        },

        "presentRelease": {

          "description": "Uplink EN-DC configurations are the configurations supported by the present release of specifications. WARNING: This shoudl not be used in any BC."

        },

        "undefined": {

          "description": "WARNING: This footnote is used in some BCs but undefined in the specification."

        },

        "void": {

          "description": "Void (might be used for some BCs but has no valid meaning anymore)"

        }