Merge branch 'ericsson-initial-import-from-19.4.0-docx' into 'Rel-19' (6f109079) · Commits · RAN4 / Specifications / 38.101 / Common

jsonSchemas/BandCombinationsCarrierAggregation.json

+52 −24

Original line number	Diff line number	Diff line
		@@ -36,16 +36,12 @@
		"type": "object",
		"additionalProperties": false,
		"properties": {
		"pc2": {
		"description": "Minimum requirements for Power Class 2 are applicable for this uplink combination or single uplink carrier in this downlink/uplink combination.",
		"type": "boolean"
		},
		"pc2_2tx": {
		"description": "Minimum requirements for Power Class 2 are applicable for this uplink combination with 1Tx antenna connector in each band or single uplink carrier with up to 2Tx antenna connectors in this downlink/uplink combination.",
		"fLim3450_3700": {
		"description": "Limited to operation at 3450-3550 MHz and 3700-3980 MHz.",
		"type": "boolean"
		},
		"pc2_3tx": {
		"description": "Minimum requirements for Power Class 2 are applicable for this uplink configuration with 1Tx antenna connector in one band and 2Tx antenna connectors in the other band.",
		"n26_DualPA": {
		"description": "Unless otherwise stated, only RF requirements for dual PA architecture are applicable for UL CA_n26(2A) and UE shall indicate the dualPA-Architecture for UL CA_n26(2A).",
		"type": "boolean"
		},
		"pc1p5": {
		@@ -60,21 +56,25 @@
		"description": "Minimum requirements for Power Class 1.5 are applicable for this uplink configuration with 1Tx antenna connector in one band and 2Tx antenna connectors in the other band.",
		"type": "boolean"
		},
		"n26_DualPA": {
		"description": "Unless otherwise stated, only RF requirements for dual PA architecture are applicable for UL CA_n26(2A) and UE shall indicate the dualPA-Architecture for UL CA_n26(2A).",
		"pc2": {
		"description": "Minimum requirements for Power Class 2 are applicable for this uplink combination or single uplink carrier in this downlink/uplink combination.",
		"type": "boolean"
		},
		"ul_n26_opt": {
		"description": "For UEs only supporting DL CA_n26-n28, uplink support in band n26 is optional, if the UE supports CA_n26-n28 UL configuration, it should also support UL in band n26 and n28.",
		"pc2_2tx": {
		"description": "Minimum requirements for Power Class 2 are applicable for this uplink combination with 1Tx antenna connector in each band or single uplink carrier with up to 2Tx antenna connectors in this downlink/uplink combination.",
		"type": "boolean"
		},
		"fLim3450_3700": {
		"description": "Limited to operation at 3450-3550 MHz and 3700-3980 MHz.",
		"pc2_3tx": {
		"description": "Minimum requirements for Power Class 2 are applicable for this uplink configuration with 1Tx antenna connector in one band and 2Tx antenna connectors in the other band.",
		"type": "boolean"
		},
		"Rel-18_800MHzUL": {
		"description": "In Rel-18 maximum aggregated uplink BW is limited to 800 MHz.",
		"type": "boolean"
		},
		"ul_n26_opt": {
		"description": "For UEs only supporting DL CA_n26-n28, uplink support in band n26 is optional, if the UE supports CA_n26-n28 UL configuration, it should also support UL in band n26 and n28.",
		"type": "boolean"
		}
		}
		}
		@@ -187,20 +187,32 @@
		"type": "object",
		"additionalProperties": false,
		"properties": {
		"psdi_6dB": {
		"description": "Maximum 6 dB power spectral density imbalance between downlink carriers is assumed when UE does not indicate intraBandNR-CA-non-collocated-r18 or UE indicates intraBandNR-CA-non-collocated-r18 and nonCollocatedTypeNR-CA-r18 is provided. Clause 7.10A.2 power imbalance requirement apply if the UE indicates intraBandNR-CA-non-collocated-r18 and nonCollocatedTypeNR-CA-r18 is not provided and UE is configured with maxMIMO-Layers with value less than or equal to 2. For these UEs, the power spectral density imbalance condition also applies for these carriers when applicable intra-band non-contiguous NR CA configuration is a subset of a higher order NR CA configuration.",
		"intraReq": {
		"description": "The minimum requirements for intra-band contiguous or non-contiguous CA apply.",
		"type": "boolean"
		},
		"ul_n5": {
		"description": "Uplink is only in n5 for CA_n5-n8.",
		"lowBandSwitchingAllowed": {
		"description": "The UEs is allowed to indicate support of low NR band carrier aggregation via switching supportedLowBandSwitching-r19 for this NR CA configuration.",
		"type": "boolean"
		},
		"intraReq": {
		"description": "The minimum requirements for intra-band contiguous or non-contiguous CA apply.",
		"lowBandSwitchingOnly": {
		"description": "Applicable only for UEs which indicate support of low NR band carrier aggregation via switching supportedLowBandSwitching-r19 for this NR CA configuration.",
		"type": "boolean"
		},
		"ul_n28": {
		"description": "UL carrier shall be supported in Band n28 only. Power imbalance between downlink carriers on Band 7 and Band 38 is assumed to be within 6dB.",
		"n5A-n8A_restrictions": {
		"description": "When UL CA_n5A-n8A is supported, some restrictions may be needed to avoid simultaneous n5DL and n8 UL during UL CA_n5A-n8A with DL CA_n5A-n8A configuration. The UE and/or NW behaviors are not specified in the 3GPP specifications when there is a conflict between n5DL and n8UL including dynamic scheduling, semi-static signals and unspecified transitions between n5DL and n8UL.",
		"type": "boolean"
		},
		"n7_n38": {
		"description": "For a band combination which include band n7 and n38 simultaneously, carriers in band n7 and n38 can only be configured as downlink carriers. Power imbalance between downlink carriers on Band n7 and Band n38 is assumed to be within 6dB.",
		"type": "boolean"
		},
		"n28_703U_758D": {
		"description": "The frequency range in band n28 is restricted for this band combination to 703- 733 MHz for the UL and 758-788 MHz for the DL.",
		"type": "boolean"
		},
		"n28_718U_773D": {
		"description": "The frequency range in band n28 is restricted for this band combination to 718-748 MHz for the UL and 773-803 MHz for the DL.",
		"type": "boolean"
		},
		"n77_RxTx": {
		@@ -211,13 +223,29 @@
		"description": "The minimum requirements only apply for non-simultaneous Rx/Tx between all carriers for TDD combinations.",
		"type": "boolean"
		},
		"n7_n38": {
		"description": "For a band combination which include band n7 and n38 simultaneously, carriers in band n7 and n38 can only be configured as downlink carriers. Power imbalance between downlink carriers on Band n7 and Band n38 is assumed to be within 6dB.",
		"noSimRxTx_noRxSensitivitySection": {
		"description": "This combination only works for non-simultaneous RX/TX. In the case that there is no simultaneous RX/TX also no RX sensitivity section is needed.",
		"type": "boolean"
		},
		"psdi_6dB": {
		"description": "Maximum 6 dB power spectral density imbalance between downlink carriers is assumed when UE does not indicate intraBandNR-CA-non-collocated-r18 or UE indicates intraBandNR-CA-non-collocated-r18 and nonCollocatedTypeNR-CA-r18 is provided. Clause 7.10A.2 power imbalance requirement apply if the UE indicates intraBandNR-CA-non-collocated-r18 and nonCollocatedTypeNR-CA-r18 is not provided and UE is configured with maxMIMO-Layers with value less than or equal to 2. For these UEs, the power spectral density imbalance condition also applies for these carriers when applicable intra-band non-contiguous NR CA configuration is a subset of a higher order NR CA configuration.",
		"type": "boolean"
		},
		"psdi_6dB_r19": {
		"description": "Maximum 6 dB power spectral density imbalance between downlink carriers is assumed when the UE indicates intraBandNR-CA-non-collocated-r19 and nonCollocatedTypeNR-CA-r1900 is provided with value type1 or is absent. Clause 7.10A.2 power imbalance requirement is applied, if the UE indicates intraBandNR-CA-non-collocated-r19 and nonCollocatedTypeNR-CA-r1900 is provided with value type4 and UE is configured with maxMIMO-Layers equal to 4. For these UEs, the power spectral density imbalance condition is also applied for their carriers when applicable intra-band non-contiguous NR CA configuration is a subset of a higher order NR CA configuration.",
		"type": "boolean"
		},
		"Rel-18_1600MHzDL": {
		"description": "In Rel-18 maximum aggregated downlink BW is limited to 1600 MHz.",
		"type": "boolean"
		},
		"ul_n5": {
		"description": "Uplink is only in n5 for CA_n5-n8.",
		"type": "boolean"
		},
		"ul_n28": {
		"description": "UL carrier shall be supported in Band n28 only. Power imbalance between downlink carriers on Band 7 and Band 38 is assumed to be within 6dB.",
		"type": "boolean"
		}
		}
		}

jsonSchemas/BandCombinationsDualConnectivity.json

+12 −0

Original line number	Diff line number	Diff line
		@@ -246,6 +246,18 @@
		},
		"NA": {
		"description": "Not Available (defined an used in Table 5.5B.4.2-1)"
		},
		"n71AA_Uplink_BCS2": {
		"description": "Uplink DC_(n)71AA is not applicable to BCS2."
		},
		"presentRelease": {
		"description": "Uplink EN-DC configurations are the configurations supported by the present release of specifications. WARNING: This shoudl not be used in any BC."
		},
		"undefined": {
		"description": "WARNING: This footnote is used in some BCs but undefined in the specification."
		},
		"void": {
		"description": "Void (might be used for some BCs but has no valid meaning anymore)"
		}
		}
		}

Admin message