diff --git a/yang-models/_3gpp-common-antennafunction.yang b/yang-models/_3gpp-eqp-antennafunction.yang similarity index 94% rename from yang-models/_3gpp-common-antennafunction.yang rename to yang-models/_3gpp-eqp-antennafunction.yang index 7748e448fe2324c0fea7a14864823722a4d11418..ea198ccc0b7511704b941e35cfad37c1cefe4168 100644 --- a/yang-models/_3gpp-common-antennafunction.yang +++ b/yang-models/_3gpp-eqp-antennafunction.yang @@ -1,196 +1,198 @@ -module _3gpp-common-antennafunction { - yang-version 1.1; - namespace "urn:3gpp:sa5:_3gpp-common-antennafunction"; - prefix "antfunc3gpp"; - - import _3gpp-common-yang-types { prefix types3gpp; } - import _3gpp-common-managed-function { prefix mf3gpp; } - import _3gpp-common-managed-element { prefix me3gpp; } - import _3gpp-common-top { prefix top3gpp; } - - organization "3GPP SA5"; - contact "https://www.3gpp.org/DynaReport/TSG-WG--S5--officials.htm?Itemid=464"; - description "Defines the YANG mapping of the Antenna Function Information - Object Class (IOC) that is part of the Generic Network Resource Model (NRM). - Copyright 2025, 3GPP Organizational Partners (ARIB, ATIS, CCSA, ETSI, TSDSI, - TTA, TTC). All rights reserved."; - reference "3GPP TS 28.662 Generic Network Resource Model (NRM)"; - - revision 2025-05-05 { description "Initial revision"; - } - grouping AntennaFunctionGrp { - description "Represents the AntennaFunction."; - uses mf3gpp:ManagedFunctionGrp; - - leaf beamTilt { - description "The beam tilt of the wanted antenna beam - in the vertical plane. A positive value on the - beamtilt indicates an antenna beam direction below the - vertical plane."; - units degree; - type types3gpp:TenthOfDegrees; - } - - leaf bearing { - description "The bearing in degrees that the antenna is pointing in. - AllowedValues: See \"Antenna bearing\" in 3GPP TS 25.463."; - reference "3GPP TS 25.463, UTRAN Iuant interface: - Remote Electrical Tilting (RET) - antennas Application Part (RETAP) signalling"; - type types3gpp:TenthOfDegrees; - } - - leaf elevation { - description "The elevation the antenna function should have, - based on World Geodetic System (1984 version) global - reference frame (WGS 84). Positive values correspond to - meters above sea level, negative values correspond to meters - below sea level. If empty, value is not defined."; - type types3gpp:Altitude; - } - - leaf horizBeamWidth { - description "The 3 dB power beamwidth of the antenna pattern - in the horizontal plane. - A value of 360 indicates an omnidirectional antenna. - Note: The value of this attribute has no operational impact - on the network, e.g. the NE behaviour is not affected by the - value setting of this attribute. - Note as well that this attribute is not supported over the - Iuant interface according to 3GPP TS37.466. - A single integral value corresponding to an angle in degrees - between 0 and 360."; - reference "3GPP TS 37.466, Iuant interface: Application part"; - type types3gpp:TenthOfDegrees; - } - - leaf latitude { - description "Latitude of transmitter antenna position. - Positive value means north, negative value means south. - - Specification: WGS 84 - Allowed Values: { -90.000000..90.000000 }"; - units degree; - type types3gpp:Latitude; - } - - leaf longititude { - description "Longitude of transmitter antenna position. - Positive value means east, negative value means west. - Specification: WGS 84 - Allowed Values: { -180.000000..180.000000 }"; - units degree; - type types3gpp:Longitude; - } - - leaf maxAzimuthValue { - description "The maximum amount of change of azimuth the RET - system can support. This is the change in degrees clockwise - from bearing. - Note: The value of this attribute has no operational impact - on the network, e.g. the NE behaviour is not affected by the - value setting of this attribute. - Note as well that this attribute is not supported over the - Iuant interface according to Ref. 3GPP TS 37.466. - A single decimal value corresponding to an angle in degrees - between 0 and 360 with a resolution of 0.1 degrees."; - reference "3GPP TS 37.466, Iuant interface: Application part"; - units degree; - type decimal64 { - range "0..360"; - fraction-digits 1; - } - } - leaf minAzimuthValue { - description "The minimum amount of change of azimuth the RET - system can support. This is the change in degrees clockwise - from bearing. - Note: The value of this attribute has no operational impact - on the network, e.g. the NE behaviour is not affected by the - value setting of this attribute. - Note as well that this attribute is not supported over the - Iuant interface according to Ref. 3GPP TS 37.466. - A single decimal value corresponding to an angle in degrees - between 0 and 360 with a resolution of 0.1 degrees."; - reference "3GPP TS 37.466, Iuant interface: Application part"; - units degree; - type decimal64 { - range "0..360"; - fraction-digits 1; - } - } - - leaf-list referencedBy { - description "This attribute contains the DNs of one or more objects - that refer to this object. - - In the case of AntennaFunction, these referring objects may - include DNs of SectorEquipmentFunction instances if associations - between them and the AntennaFunction exist. - - Note: referencedBy is a DN datatype and so can reference an MOI - under a different ME"; - config false; - type types3gpp:DistinguishedName; - } - - - leaf retGroupName { - description "The group name is a textual, alpha-numeric string to - define a logical grouping of antennas which may be in different cells. - - This attribute permits the definition of a logical grouping - of the antennas. This may be defined either at - installation time, or by management activity"; - type string; - } - - leaf retTiltValue { - description "The electrical tilt setting of the antenna, \"Tilt value\" in - 3GPP TS 37.466."; - reference "3GPP TS 37.466, Iuant interface: Application part"; - type types3gpp:TenthOfDegrees; - } - - leaf vertBeamWidth { - description "The 3 dB power beamwidth of the antenna pattern in - the vertical plane. - The value of this attribute has no operational impact on - the network, e.g. the NE behaviour is not affected by the - value setting of this attribute. - This attribute is not supported over the Iuant interface - according to Ref. 3GPP TS 37.466."; - reference "3GPP TS 37.466, Iuant interface: Application part"; - units degree; - type uint32 { - range "0..180"; - } - } - - leaf-list theCellList { - description "This attribute contains the DNs of EUtranGenericCell - or UtranGenericCell if associations between them exist. - This attribute contains the DNs of GSMCellPart if association - between them exist. "; - config false; - status deprecated; - type types3gpp:DistinguishedName; - } - - } - - augment "/me3gpp:ManagedElement" { - - list AntennaFunction { - key id; - uses top3gpp:Top_Grp; - description "This MOI represents an array of radiating elements that - may be tilted to adjust the RF coverage of a cell(s)."; - - container attributes { - uses AntennaFunctionGrp; - } - uses mf3gpp:ManagedFunctionContainedClasses; - } - } -} +module _3gpp-eqp-antennafunction { + yang-version 1.1; + namespace "urn:3gpp:sa5:_3gpp-eqp-antennafunction"; + prefix "ant3gpp"; + + import _3gpp-common-yang-types { prefix types3gpp; } + import _3gpp-common-managed-function { prefix mf3gpp; } + import _3gpp-common-managed-element { prefix me3gpp; } + import _3gpp-common-top { prefix top3gpp; } + + organization "3GPP SA5"; + contact "https://www.3gpp.org/DynaReport/TSG-WG--S5--officials.htm?Itemid=464"; + description "Defines the YANG mapping of the Antenna Function Information + Object Class (IOC) that is part of the Generic Network Resource Model (NRM). + Copyright 2025, 3GPP Organizational Partners (ARIB, ATIS, CCSA, ETSI, TSDSI, + TTA, TTC). All rights reserved."; + reference "3GPP TS 28.541 5G Network Resource Model (NRM)"; + + revision 2025-08-19 { reference "CR1579";} + revision 2025-05-05 { reference "Initial revision";} + + + grouping AntennaFunctionGrp { + description "Represents the AntennaFunction."; + uses mf3gpp:ManagedFunctionGrp; + + leaf beamTilt { + description "The beam tilt of the wanted antenna beam + in the vertical plane. A positive value on the + beamtilt indicates an antenna beam direction below the + vertical plane."; + units degree; + type types3gpp:TenthOfDegrees; + } + + leaf bearing { + description "The bearing in degrees that the antenna is pointing in. + AllowedValues: See \"Antenna bearing\" in 3GPP TS 25.463."; + reference "3GPP TS 25.463, UTRAN Iuant interface: + Remote Electrical Tilting (RET) + antennas Application Part (RETAP) signalling"; + type types3gpp:TenthOfDegrees; + } + + leaf elevation { + description "The elevation the antenna function should have, + based on World Geodetic System (1984 version) global + reference frame (WGS 84). Positive values correspond to + meters above sea level, negative values correspond to meters + below sea level. If empty, value is not defined."; + type types3gpp:Altitude; + } + + leaf horizBeamWidth { + description "The 3 dB power beamwidth of the antenna pattern + in the horizontal plane. + A value of 360 indicates an omnidirectional antenna. + Note: The value of this attribute has no operational impact + on the network, e.g. the NE behaviour is not affected by the + value setting of this attribute. + Note as well that this attribute is not supported over the + Iuant interface according to 3GPP TS37.466. + A single integral value corresponding to an angle in degrees + between 0 and 360."; + reference "3GPP TS 37.466, Iuant interface: Application part"; + type types3gpp:TenthOfDegrees; + } + + leaf latitude { + description "Latitude of transmitter antenna position. + Positive value means north, negative value means south. + + Specification: WGS 84 + Allowed Values: { -90.000000..90.000000 }"; + units degree; + type types3gpp:Latitude; + } + + leaf longititude { + description "Longitude of transmitter antenna position. + Positive value means east, negative value means west. + Specification: WGS 84 + Allowed Values: { -180.000000..180.000000 }"; + units degree; + type types3gpp:Longitude; + } + + leaf maxAzimuthValue { + description "The maximum amount of change of azimuth the RET + system can support. This is the change in degrees clockwise + from bearing. + Note: The value of this attribute has no operational impact + on the network, e.g. the NE behaviour is not affected by the + value setting of this attribute. + Note as well that this attribute is not supported over the + Iuant interface according to Ref. 3GPP TS 37.466. + A single decimal value corresponding to an angle in degrees + between 0 and 360 with a resolution of 0.1 degrees."; + reference "3GPP TS 37.466, Iuant interface: Application part"; + units degree; + type decimal64 { + range "0..360"; + fraction-digits 1; + } + } + leaf minAzimuthValue { + description "The minimum amount of change of azimuth the RET + system can support. This is the change in degrees clockwise + from bearing. + Note: The value of this attribute has no operational impact + on the network, e.g. the NE behaviour is not affected by the + value setting of this attribute. + Note as well that this attribute is not supported over the + Iuant interface according to Ref. 3GPP TS 37.466. + A single decimal value corresponding to an angle in degrees + between 0 and 360 with a resolution of 0.1 degrees."; + reference "3GPP TS 37.466, Iuant interface: Application part"; + units degree; + type decimal64 { + range "0..360"; + fraction-digits 1; + } + } + + leaf-list referencedBy { + description "This attribute contains the DNs of one or more objects + that refer to this object. + + In the case of AntennaFunction, these referring objects may + include DNs of SectorEquipmentFunction instances if associations + between them and the AntennaFunction exist. + + Note: referencedBy is a DN datatype and so can reference an MOI + under a different ME"; + config false; + type types3gpp:DistinguishedName; + } + + + leaf retGroupName { + description "The group name is a textual, alpha-numeric string to + define a logical grouping of antennas which may be in different cells. + + This attribute permits the definition of a logical grouping + of the antennas. This may be defined either at + installation time, or by management activity"; + type string; + } + + leaf retTiltValue { + description "The electrical tilt setting of the antenna, \"Tilt value\" in + 3GPP TS 37.466."; + reference "3GPP TS 37.466, Iuant interface: Application part"; + type types3gpp:TenthOfDegrees; + } + + leaf vertBeamWidth { + description "The 3 dB power beamwidth of the antenna pattern in + the vertical plane. + The value of this attribute has no operational impact on + the network, e.g. the NE behaviour is not affected by the + value setting of this attribute. + This attribute is not supported over the Iuant interface + according to Ref. 3GPP TS 37.466."; + reference "3GPP TS 37.466, Iuant interface: Application part"; + units degree; + type uint32 { + range "0..180"; + } + } + + leaf-list theCellList { + description "This attribute contains the DNs of EUtranGenericCell + or UtranGenericCell if associations between them exist. + This attribute contains the DNs of GSMCellPart if association + between them exist. "; + config false; + status deprecated; + type types3gpp:DistinguishedName; + } + + } + + augment "/me3gpp:ManagedElement" { + + list AntennaFunction { + key id; + uses top3gpp:Top_Grp; + description "This MOI represents an array of radiating elements that + may be tilted to adjust the RF coverage of a cell(s)."; + + container attributes { + uses AntennaFunctionGrp; + } + uses mf3gpp:ManagedFunctionContainedClasses; + } + } +} diff --git a/yang-models/_3gpp-common-sectorequipmentfunction.yang b/yang-models/_3gpp-eqp-sectorequipmentfunction.yang similarity index 88% rename from yang-models/_3gpp-common-sectorequipmentfunction.yang rename to yang-models/_3gpp-eqp-sectorequipmentfunction.yang index 39202e0319e40d7e1747bb6a61fbc7bc1b2eacd3..90d6729a25bd2b691ccb0697ceccb54fefb2b22c 100644 --- a/yang-models/_3gpp-common-sectorequipmentfunction.yang +++ b/yang-models/_3gpp-eqp-sectorequipmentfunction.yang @@ -1,109 +1,105 @@ -module _3gpp-common-sectorequipmentfunction { - yang-version 1.1; - namespace "urn:3gpp:sa5:_3gpp-common-sectorequipmentfunction"; - prefix "scteqpfun3gpp"; - - import _3gpp-common-yang-types { prefix types3gpp; } - import _3gpp-common-managed-function { prefix mf3gpp; } - import _3gpp-common-managed-element { prefix me3gpp; } - import _3gpp-common-top { prefix top3gpp; } - - organization "3GPP SA5"; - contact "https://www.3gpp.org/DynaReport/TSG-WG--S5--officials.htm?Itemid=464"; - description "Defines the YANG mapping of the Sector Equipment Function - Information Object Class (IOC) that is part of the Generic Network Resource - Model (NRM). - Copyright 2025, 3GPP Organizational Partners (ARIB, ATIS, CCSA, ETSI, TSDSI, - TTA, TTC). All rights reserved."; - reference "3GPP TS 28.662 Generic Network Resource Model (NRM)"; - - revision 2025-05-05 { description "Initial revision"; } - - grouping SectorEquipmentFunctionGrp { - description "Represents the SectorEquipmentFunction."; - uses mf3gpp:ManagedFunctionGrp; - - leaf confOutputPower { - description "It defines the allowed total power to use for all - cells together in this sector. - It may be set by the operator and/or limited by HW limitation - or licensed power, e.g.: 20, 40, 60, 80,120 watts"; - type uint32; - } - - leaf-list fqBandList { - description "The list of frequency bands/ranges supported by the - hardware associated with the SectorEquipmentFunction. The - earfcnDl and earfcnUl or earfcn of cells associated with the - SectorEquipmentFunction must be assigned one of the specified - frequency range values within the supported range. - - Valid frequency bands/ranges may be found in 3GPP TS 25.104 (UTRA), - 36.104 (E-UTRA) and 38.104 (NR). - - AllowedValues: - Operating band id or supported frequency tuple -