| SSB with index 1 | $\frac{\hat{E}_s}{I_{ot}}$ | | dB | -17 | Power of SSB with index 1 is set to be below configured *rsrp-ThresholdSSB* |
| | $N_{oc}$ | Config 1,2 | dBm/15kHz | -98 | |
| | | Config 3,4 | | -101 | |
| |  | | dB | -17 | |
| | $\frac{\hat{E}_s}{N_{oc}}$ | | dB | -17 | |
| | SS-RSRP | Config 1,2 | dBm/15kHz | -115 | |
| | | Config 3,4 | | -118 | |
| | SS-RSRP | | dBm/SCS | -115 | |
| Io ^Note\ 2^ | | Config 1,2 | dBm | -65.3/9.36MHz | For symbols without SSB index 1 |
| | | Config 3,4 | | -62.2/38.16MHz | |
| ss-PBCH-BlockPower | | | dBm/SCS | -5 | As defined in clause 6.3.2 in TS 38.331 \[13\]. |
| Configured UE transmitted power () | | | dBm | 23 | As defined in clause 6.2.4 in TS 38.101-1 \[2\]. |
| Configured UE transmitted power ($P_{CMAX,f,c}$) | | | dBm | 23 | As defined in clause 6.2.4 in TS 38.101-1 \[2\]. |
| PRACH Configuration | | | | PRACH.1 FR1 | As defined in clause A.7.1. |
| Propagation Condition | | | \- | AWGN | |
| NOTE 1: OCNG shall be used such that the cell is fully allocated, and a constant total transmitted power spectral density is achieved for all OFDM symbols. The OCNG pattern is chosen during the test according to the presence of a DL reference measurement channel.`<br />`{=html}NOTE 2: Es/Iot, SS-RSRP and Io level have been derived from other parameters for information purpose. They are not settable parameters.`<br />`{=html}NOTE 3: Void.`<br />`{=html}NOTE 4: The DL PDSCH reference measurement channel is used in the test only when a downlink transmission dedicated to the UE under test is required. | | | | | |
@@ -1888,24 +1888,24 @@ based random access test in FR1 for PSCell in EN-DC
| EPRE ratio of PDCCH to PDCCH_DMRS | | | dB | | | |
| EPRE ratio of PDSCH_DMRS to SSS | | | dB | | | |
| EPRE ratio of PDSCH to PDSCH_DMRS | | | dB | | | |
| SSB with index 0 |  | | dB | 3 | 3 | Power of SSB with index 0 is set to be above configured *rsrp-ThresholdSSB* |
| NOTE 1: OCNG shall be used such that the cell is fully allocated, and a constant total transmitted power spectral density is achieved for all OFDM symbols. The OCNG pattern is chosen during the test according to the presence of a DL reference measurement channel.`<br />`{=html}NOTE 2: Es/Iot, SS-RSRP and Io levels have been derived from other parameters for information purpose. They are not settable parameters.`<br />`{=html}NOTE 3: Void.`<br />`{=html}NOTE 4: The DL PDSCH reference measurement channel is used in the test only when a downlink transmission dedicated to the UE under test is required. | | | | | | |